The
Acrylic Seal Fischer SAR BI in watery dispersion for internal plastered walls with rough effect
- Mercato CE for the sealing of facades, internal side.
- The grain structure is ideal for rough surfaces and ensures an appearance similar to the raw plaster.
- The acrylic sealing in watery dispersion is odorless and is therefore ideal for use in closed environments. It does not contain solvents and is not corrosive.
- Good resistance to chemical agents and UV rays. In conditions of extreme irradiation could change coloring.
- Resistant to the watering of water (non -stagnant) and humidity after hardening.
- The product is painted. Perform a preliminary test to evaluate the covering capacity of the specific paint.
Instructions for use
- Eliminate from dirty surfaces, dust, oil and rust. Smoid or sandblast the porous surfaces.
- Cut the extreme extremity, apply the spout to the cartridge, cut the tip to adapt it to the size of the joint and insert in a FISCER KP "parnm" otho "otto" otto or kp "otho" silicone dispenser.
- Apply the adhesive tape to the margins of the joint and therefore the product along the same. Level with spatula.
- Remove the tape from the edges of the joint.
- Clean the work tools and the product not hardened with water. The hardened product can only be removed mechanically.
- Not suitable for applications with continuous immersion in water and in case of rain or imminent frost.
Technical specifications
- 12 months storage
- Content 310 Ml
